![](https://thermxtherapy.com/wp-content/uploads/thermx-home-banner2.jpg)
THERM-X HOME
Get your patients colder faster with the most effective cold compression product on the market. The Therm-X can deliver single cycle temperatures as cold as 34 degrees (as cold as any ice machine). If continuous cold is needed the Therm-X can be set to 40 degrees, colder than any of its thermoelectric competitors.
The Therm-X allows for either intermittent compression, or static if you are looking for a more intense edema reduction. A password can be engaged to prevent the patient from changing protocol settings.
Want more details about the Therm-X HOME?
![thermx-home-slider1](https://thermxtherapy.com/wp-content/uploads/thermx-home-slider1.png)
![thermx-home-slider2](https://thermxtherapy.com/wp-content/uploads/thermx-home-slider2.png)
![thermx-home-slider3](https://thermxtherapy.com/wp-content/uploads/thermx-home-slider3.png)
![thermx-home-slider4](https://thermxtherapy.com/wp-content/uploads/thermx-home-slider4.png)
Where can I get a Therm-X HOME?
Get Colder Faster. No Ice Required.
COLDER THAN MOST - EVEN ICE MACHINES!
The temperature you want is the temperature you get. With digital control, you can set a specific temperature and repeat it cycle after cycle, unlike Ice Machines that lose their cool as the ice melts.
WHY NOT WARM UP TOO?
Because the Therm-X is digitally driven, it can get hot as well as cold. Use the Therm-X when your protocol requires heat. No ice machine can do that! The Therm-X eliminates the need for hot packs, cold packs, and ice.
COMPRESSION = CONTACT
Aside from compression’s clinical benefits, compression enhances thermal transfer. The Therm-X has five compression settings that ensure the Garment’s thermal zone stays in contact with the patient to deliver therapeutic temperatures.
"best modality of its kind that we have seen..."
![](https://thermxtherapy.com/wp-content/uploads/therm-x-home-callouts-2.jpg)
![](https://thermxtherapy.com/wp-content/uploads/compt-screen1-2.jpg)
Intuitive touch screen with pre-programmed or customized protocols.
![](https://thermxtherapy.com/wp-content/uploads/home-tank.jpg)
Easy fill tank uses distilled water and isopropyl alcohol. Does not require constant refilling and cleaning, like an ice machine.
THERM-X HOME SPECIFICATIONS
Catalog NUMBER
TX0300
SIZE
10″ x 9″ x 15″
WEIGHT
~ 14 lbs.
Coolant Tank Capacity
400 ml
Coolant Formulation
90% Distilled Water, 10% Isopropyl Alcohol
Power Supply
100V AC – 240V AC, 50/60 Hz
Umbilical Hose
5′ Long with 3-in-one Machine Connector and 3 Garment Connectors
Default Cold Settings
34°F, 45°F, 55°F
Continuous Cycle Cold Settings
40°F – 55°F
Default Heat Settings
105°F, 107°F, 110°F
Continuous Cycle Heat Settings
105°F – 107°F
Non Continuous Cycle Length
Default 10 or 20 minutes, Customizable to 3–40 minutes
Continuous Cycle (runs indefinitely)
Active: 10–40 minutes, Rest: 30–60 minutes
Garment Edema Pressures
0, 5, 20, 45, and 70 mm Hg
(light, low, medium, and high)
Calf DVT Pressure Range
50 – 70 mm Hg
Foot DVT Pressure Range
90 – 120 mm Hg
Preset Protocols
3 Preset treatment selections and one customizable preset.